|
Fabrics
& High Speed Back plane
|
 |
SRDP
RapidIO® Serial Evaluation Chassis and System using the Tundra Tsi568A™ or Tsi578™ switch.
Click here for 3rd Party software tools
Click here to get Tsi568A™ feature sheet
Click here for Tool Boards
Click here to get schematics for Tsi568A
Click here for for Tsi568A BOM
Click here to get manual for Tsi568A
Please contact us at 440.461.4700 for additional information
|
|
|
HIP 2
board
Hardware
Interoperability Platform and Prototyping System is an STx branded
version of the Tundra Semiconductor HIP 2 board for the Tsi500 switch
less the PCI circuitry. This board is no longer available from Tundra;
however STx will continue to produce and support it for 10 years.
Click
here for software tools
Click
here to download more information about the HIPPS Board.
|
 |
HIP
2 system
A stand-alone
RapidIO® hardware and software development system supporting
QNX, Linux, and OSE.
Click
here for software tools
Click here to
download more information about the HIPPS System.
|
 |
SSRP
Each kit includes Schematics, user manual, standoffs, support contact information for STx
Typical Applications for Serial RIO
- System level solutions with Qos demands
- Mesh networking, wired or wireless
- Mulitprocessor systems
- ASIC/SOC/IP development
- Deterministic board to board solutions
- Low overhead SMP implementations
Click here to download more information about the SSRP.
|
 |
ZLE60400
25 Gbps Multiprotocol ATCA & micoTCA Optical Extender Featuring Zarlink Optical Transceivers
- 2 ZL60304 4 port optical transceivers
- Interoperability
- RapidIO
- AS-PCIe
- Infiniband
- XAUI (10GE)
- 25 Gbps total bandwidth
- JTAG interface
- MMC control for IMPI
- Local power option for stand-alone operation
- Half/Full Height, Single width size AMC slot (180mm x 74mm)
Click here to download more information about the ZLE60400.
Click here to download schematics for the ZLE60400. |
 |
AMC8548
AMC8548 is a commercially available ODM standard product blade for ATCA and MicroTCA Serial RapidIO® systems “with its integral cryptographic accelerator, X-or, and TSEC (gig-e) features, it is ideal for network security/virtual storage applications” AMC8548 Features
- Freescale PowerQUICC3 Processor MPC8548 or MPC8543
- SRIO x4lanes interface
- Dual Gigabit Ethernet into backplane, 1 TSEC line IO
- DRAM DDR2 SODIMM module- capacity 128Mbyte to 2 Gbytes
- Flash (boot) up to 16 mbytes
- JTAG and MMC control for IMPI
- Local power option for stand-alone operation
- RS-232 craft port
- USB A interface on line side for firmware upgrades
- Full Height Single width size (180mm x 74mm)
Click here to download more information about the AMC8548.
Click here to Download Software PDF |
 |
SMA Breakout
AMC.0 (.1,.2,.3,.4) Fabric Development Tool
Interfaces the standard 170 pin Yamaichi connector to 16
SMA connectors- Pinout is: B44-B54 and B59-B69
Loops signals on 170 pin Yamaichi connectors to each other Pin connectors loopback connections
Click here to download more information about the SMA breakout and ATCA Loopback. |
 |
AMC70K2000
Serial RapidIO Advanced Mezzanine Card (AMC) for IDT Semiconductor PPS (Pre-Processing Switch), IDT70K2000 AMC70K2000 is the highest performance commercially available DSP standard product blade for both ATCA and MicroTCA Serial RapidIO systems
• IDT70K2000 Serial RapidIO Switch
• SRIO x40 lanes and 22 ports
• 4 Fabric connected TI TMS320C6455/6482 DSPs
• 3 Gigabit Ethernet into backplane, 1 line IO
• DRAM DDR2 up to 128mbytes per DSP
• Flash storage (serial high speed) and i2c
• JTAG for system boot master, DSPs, MMC
• MMC control for IPMI with additional applications
• Local power option for stand-alone operation
• Full Height Single width size (180mm x 74mm)
• PPS: Pre-Processing capability boosts performance
• Mezzanine with x4 SRIO interface for expansion
Click here to download more information about the AMC70K2000. |
 |
RIP-EVM
Rapid IO to PCI Evaluation Module for TMS320C6455 with Tundra Tsi564a “RIP-EVM”
Standard 3.3V PCI card with:
• 3 LVDS connectors (Infiniband Style)
• 1 Gigabit Ethernet
• JTAG for both TI and Tundra
• RS232 port
• External power (stand alone) option
• FuturePlus FS4410 interfaceion
Click here to download more information about the RIP.
|
 |
SerB Mezzanine
The IDT RapidIO Serial Buffer is the first fabric IO memory device. Connected to an FPGA or ASIC, it is a powerful solution to manage and police a very high speed data stream without impeding traffic flow. Some applications include:
- Stateful Packet Management
- Radio Base band processing functions
- Wireless infrastructure system throughput
- And many others
Click here to download more information about the Serial Buffer Mezzanine.
In order to open this downloaded document you will need Adobe Acrobat Reader, click here for free version.
|
 |
XLX Mezzanine
Customize your AMC70K2000 with a Xilinx FPGA daughter card using the V4FX60FF1152C.
When the SRIO Core library* is uploaded, the mezz card becomes an SRIO endpoint capable of processing SRIO traffic data for the AMC70K2000 though the IDT PPS switch. The remaining FPGA gates can be coded to provide a wide variety of co-processors tasks including:
- Security algorithms
- Base band processing functions
- Fast-path networking
- And many others
Click here to download more information about the Xilink Serial RapidIO Mezzanine Card.
In order to open this downloaded document you will need Adobe Acrobat Reader, click here for free version. |
|
FPGA Expander
Xilinx Serial RapidIO Mezzanine Card
When the SRIO Core library is uploaded, the FPGA expander card becomes an SRIO endpoint capable of processing SRIO traffic data through any standard LVDS interface (extra cables available at STx). The remaining FPGA gates can be coded to provide a wide variety of co-processor tasks including:
- Security algorithms
- Base band processing functions
- Fast-path networking
- And many others
Click here to download more information about the FPGA Expander.
In order to open this downloaded document you will need Adobe Acrobat Reader, click here for free version. |
 |
Half-Pipe
AMC SRIO Bridge to Infiniband
Half-pipe is an SRIO tool that provides a physical bridge from AMC.4 slot to Infiniband. Our tool allow cables up to 10 meters to be connected between SRIO systems through a standard AMC.4 edge card.
- AMC.4 Edge card connector
- Impedance controlled
- No active components
- Single x4, ports 5-8
- Standard AMC form factor
- Infinitband (LVDS) connector
- Cable lengths up to 10 meters
Click here to download more information about the HALF-PIPE.
In order to open this downloaded document you will need Adobe Acrobat Reader, click here for free version. |
 |
EVC80KSW0001, EVC80KSW0001FS
Product not stocked, available on made to order basis only
Stand-alone SRIO Evaluation Carrier Features:
- IDT 80KSW0001 PPS Switch
- AMC ports (2)
- SMA 1x (1)
- Infiniband ports (1)
- Logic Headers (2)
- I2C Port (1)
Click here to download infomation on another product to replace the EVC80KSW0001, EVC80KSW0001FS.
In order to open this downloaded document you will need Adobe Acrobat Reader, click here for free version. |
In order to open this downloaded document you will
need Adobe Acrobat Reader, click
here for free version. |
ABOUT STx
